|
ANDRÉS JARAMILLO-BOTERO, Ph.D. |
|||
ACADEMIC ADVISING | ||||
|
An important part of my teaching and research activities has involved serving as thesis advisor, project mentor or co-mentor for undergraduate and graduate students. I have set up this page to recognize the work and progress of those who have worked under my guidance/supervision in the past (to the best of my recollection). It also gives me a good excuse to track their whereabouts and follow up on their activities. I will always wish everyone the highest success.
The list is presented in reverse chronological order (referenced to graduation dates). |
|||
Date |
Name | Degree | Area/project of research | Currently |
2022- | Vigila Nelliparambil | Ph.D. student in Polymer Science (chemistry), UniversityUniversité de Technologie de Compiègne (France) | Piezoelectric polymers | Caltech |
2022- | Viviana Ortega | Ph.D. student in Engineering and Applied Science (chemistry), Javeriana | Rapid detection of cancer biomarkers | iOMICAS Research Institute |
2018- | Gustavo Lara | PhD student in Engineering and Applied Science (Bio-Chemistry), Javeriana | Sucrose-selective ligands design and synthesis | iOMICAS Research Institute |
2018- | Sammy Perdomo | PhD student in Engineering and Applied Science (Electronics), Javeriana | Plant biosensors | iOMICAS Research Institute |
2018- | Pedro Hernandez | PhD student in Engineering and Applied Science (Bio-Chemistry), Javeriana | Plant GPCR analogs (GCR1) | Pontificia Universidad Javeriana |
2022 | Vanessa Reyes | M.Sc. student in Biotechnology, Universidad ICESI | Metal ion electrochemical sensors | iOMICAS Institute |
2021-22 | Gabriel Velez | M.Sc. student in Biotechnology | Rapid SARS-CoV-2 electrochemical immunosensor | iOMICAS Institute |
2022-23 | Eduardo Ramirez | B.S. student in Mechanical Engineering, Javeriana | Articulated mechanical phenotyping platforms | Pontificia Universidad Javeriana |
2022-23 | Manuela Zuluaga | B.S. student in Mechanical Engineering, Javeriana | Articulated mechanical phenotyping platforms | Pontificia Universidad Javeriana |
2021-23 | German Franco | B.S. student in Electronics Engineering, Javeriana | NDIR N2O gas detection and quantification | Pontificia Universidad Javeriana |
2021-23 | Sebastian Lopez | B.S. student in Electronics Engineering, Javeriana | NDIR N2O gas detection and quantification | Pontificia Universidad Javeriana |
2012- | Himanshu Mishra | PhD student in Chemistry, Caltech | Layered double hydroxide materials for CO2 capture | Caltech |
2011- | Jason Crowley | PhD student in Chemistry, Caltech | Polymer membranes for fuel cells | Caltech |
2011- | David Lehtihet | PhD student in Chemistry, Caltech | Colloid-based (Latex) thin films | Caltech |
2011 |
Chi Feng | SURF student, Physics undergraduate, Caltech | Hypervelocity impact modeling | Caltech |
2011- | Jonas Karlsen | Exchange student in Chemistry, Caltech | Entropy-informed molecular clustering | Caltech |
2010- | Vaclav Cvicek | PhD student in Physics, Caltech | JPL-Cassini HC hypervelocity impact, DNA nano-sequencing devices | Caltech |
2010- | Mu-Jeng Cheng | PhD student in Materials Science, Caltech | Reactive dynamics in JPL-Cassini HC hypervelocity impact | Caltech |
2008- | Qi An | PhD student in Materials Science, Caltech | Hypervelocity impact dynamics | Caltech |
2009- | Hai Xiao | PhD student in Chemistry, Caltech | QM and non-adiabatic dynamics methods and applications | Caltech |
2008- | Patrick Theofanis | PhD student in Chemistry, Caltech | Electron force field methods and applications | Caltech |
2008- | Will Ford | PhD student in Neurocomputation, Caltech | Global optimization schemes for molecular simulation methods | Caltech |
2009 |
Da Hye Song | SURF student, Caltech | Development of pseudo-potentials for eFF - electronic force field | Caltech |
|
Joy Lin |
SURF student, Caltech | Development of Hessian of second-derivatives methods for systematic molecular clustering | Caltech |
2007- | Victor Rivera | BS Computer Engineering (PUJ) | Visual Multiparadigm Programming | Research Assistant, PUJ, Cali-Colombia |
2007- | Jorge Victoria | BS Computer Engineering (PUJ) | Visual Multiparadigm Programming | Research Assistant, PUJ, Cali-Colombia |
2007 | Cesar A. Hernandez | BS Electronic Engineering (PUJ) | Design and integration of an automated parts assembly station into an FMS cell | US |
2007 | Antal Buss | MS Computer Engineering, Univalle | Parallel Molecular Dynamics methods and algorithms | Parallel algorithms, Texas A&M |
2006- | Juan David Hernandez | BS Electronics Engineering (PUJ) | Biped Multibody Dynamics | |
2006- | Ximena Magdalena | BS Electronics Engineering (PUJ) | Biped Multibody Dynamics | |
2006 | Juan C. Acosta | BS Electronic Engineering (PUJ) | Modeling and simulation of robotic serpentine using strictly parallel algorithms | Nanomanipulation, U. Pierre et Marie Curie, France |
2006 | Julian D. Colorado | BS Electronic Engineering (PUJ) | Modeling and simulation of robotic serpentine using strictly parallel algorithms | Robotics, UPM Spain |
2006 | Juan M. Florez | BS Electronic Engineering (PUJ) | Modeling and simulation of robotic serpentine using strictly parallel algorithms | Robotics, U. Pierre et Marie Curie, France |
2006 | Juan M. Venturello | BS Industrial Engineering (PUJ) | Modeling and simulation environment for RVM-1 robots | Roche, Switzerland |
2005- | Felipe A. Hurtado | BS Electronics Engineering (PUJ) | Parallel robot microcontroller | |
2005- | David Osorio | BS Electronics Engineering (PUJ) | Parallel robot microcontroller | |
2004 | Juan F. Correa | BS Electronic Engineering (PUJ) | Numerical methods for trajectory planning of robot manipulators | Robotics, UPM, Spain |
2004 | Ivan J. Osorio | BS Electronic Engineering (PUJ) | Numerical methods for trajectory planning of robot manipulators | |
2004 | Simon Plata | BS Electronic Engineering (PUJ) | Motion control methods for Automated Guided Vehicles | |
2004 | Juan P. Daza | BS Electronic Engineering (PUJ) | Numerical optimization of multibody inertia mass operators | |
2003 | Daniel F. Coral | BS Electronic Engineering (PUJ) | Inverse dynamics VHDL hardware engine for robot control | |
2003 | Andrei Tchira | BS Industrial Engineering (PUJ) | Analysis of robotic arms in the context of industrial cell applications | |
2003 | Adriana Uribe | BS Industrial Engineering (PUJ) | Analysis of robotic arms in the context of industrial cell applications | |
2003 | Beatriz Delgado | BS Electronic Engineering (PUJ) | Automated trajectory guidance of robotic manipulators for spinal cord instrumentation | |
2003 | Leonardo Jordan | BS Electronic Engineering (PUJ) | Inverse dynamics VHDL hardware engine for robot control | |
2003 | Andres L. Suarez | BS Computer Engineering (PUJ) | Tactile excitation terminal for the visually impaired | |
2003 | Arnold Manozca | Industrial Engineering (PUJ) | Automated Assembly Station for FMS cell | |
2003 | Aydee P. Escallon | BS Computer Engineering (PUJ) | Hierarchical Object Oriented Design (HOOD) specification-code generation | |
2003 | Maria N. Herrera | BS Computer Engineering (PUJ) | Hierarchical Object Oriented Design (HOOD) specification-code generation | |
2003 | Catalina Garces | BS Industrial Engineering (PUJ) | Fuzzy logic inference methodology for integration of robotic systems into industrial production lines | |
2003 | Ana M. Gonzalez | BS Industrial Engineering (PUJ) | Fuzzy logic inference methodology for integration of robotic systems into industrial production lines | |
2003 | Nicolas E. Rojas | BS Electronic Engineering (PUJ) | Simplified dynamics complexity via kinematics and mass distribution design in multibody systems | Robotics, UPM, Spain |
2003 | Antonio A. Matta | BS Computer Engineering (PUJ) | Robot graphics modeling and simulation framework (ROBLAB) | Robotics, UPM, Spain |
2003 | Wilber Perea | BS Computer Engineering (PUJ) | Robot graphics modeling and simulation framework (ROBLAB) | Canada |
2001 | Sandra O. Lopez | BS Computer Engineering (PUJ) | Optimization of Parallel Algorithms for Multibody Dynamics | PUJ |
2001 | Marlin E. Silva | BS Computer Engineering (PUJ) | Optimization of Parallel Algorithms for Multibody Dynamics | |
2000 | Diego F. Gonzalez | BS Electronic Engineering (PUJ) | Automation of an octopus screen-printing system | |
2000 | Jimmy R. Opayome | BS Electronic Engineering (PUJ) | Automation of an octopus screen-printing system | |
2000 | John J. Castano | BS Electronic Engineering (PUJ) | Automated energy consumption control via AC lines digital modulation | |
2000 | Walter Ortiz | BS Electronic Engineering (PUJ) | Automated energy consumption control via AC lines digital modulation | |
1999 | Maribel Sacanamboy | BS Electronic Engineering (PUJ) | Reconfigurable hardware for parallel fuzzy control | PUJ |
1998 | Ricardo Chavarriaga | BS Electronic Engineering (PUJ) | Parallel Neural Network positional controller for 6-DOF robotic arm | Cerebral interfaces, EPFL, Switzerland |
1997 | Mario J. Mora | BS Computer Engineering (PUJ) | 3D design and modeling framework for robot design (HERON) | Faculty, PUJ, Cali-Colombia |
1997 | Jesus A. Sanchez | BS Computer Engineering (PUJ) | 3D design and modeling framework for robot design (HERON) | |
1996 | Carlos E. Bravo | BS Computer Engineering (PUJ) | Fuzzy Logic Control and Decision Making | |
1996 | Andres Dorado | BS Computer Engineering (PUJ) | Fuzzy Logic Control and Decision Making | |
1994 | Carlos R. Cristancho | BS Computer Engineering (PUJ) | PC add-on card for video digitalization | |
1994 | Jorge H. Fandino | BS Computer Engineering (PUJ) | PC add-on card for video digitalization | |
1994 | Luis E. Bustos | BS Computer Engineering (PUJ) | 3D scanning and image representation system | |
1994 | Carlos E. Rivas | BS Computer Engineering (PUJ) | 3D scanning and image representation system | |
1993 | Mario E. Valencia | BS Computer Engineering (PUJ) | Parallel Algorithms for Fast Fourier Analysis | Mathematics and Algorithms,Faculty, France |
1993 | Maria C. Lara | BS Computer Engineering (PUJ) | Control and supervision of a photosynthesis process | |
1993 | Herminsul Orobio | BS Computer Engineering (PUJ) | Distributed control for CNC machines | |
1993 | Roberto Zuluaga | BS Computer Engineering (PUJ) | Distributed control for CNC machines | |
1993 | Jose A. Rodriguez | BS Computer Engineering (PUJ) | Automation of a bowling alley | |
1993 | Jaime H. Trujillo | BS Computer Engineering (PUJ) | Automation of a bowling alley | |
1993 | Luis H. Velasco | BS Computer Engineering (PUJ) | CAD-CAM with systematic CNC code generation | |
1993 | Maria C. Pabon | BS Computer Engineering (PUJ) | Digital control of electrical appliances via AC line modulation | Faculty, PUJ, Cali-Colombia |
1993 | Gloria E. Aranzazu | BS Computer Engineering (PUJ) | Digital control of electrical appliances via AC line modulation | |
1992 | Gabriel Tamura | BS Computer Engineering (PUJ) | C compiler design for register-based machines | Faculty, ICESI, Cali-Colombia |
1992 | Juan C. Otalora | BS Computer Engineering (PUJ) | Algorithms for computerized cardiopathy diagnosis | |
1992 | Alex F. Bastidas | BS Computer Engineering (PUJ) | Design of an arc-soldering Robotic system | |
1992 | Jose F. Murrillo | BS Computer Engineering (PUJ) | Robotics modeling and programming for instruction and training | Faculty, PUJ Bogota-Colomia |
1992 | German Urrego | BS Computer Engineering (PUJ) | Robotics modeling and programming for instruction/training | |
|
|
|||
|
This page was last updated 3/15/2012 1:01:03
PM
Note: I've added an underscore "_" after each e-mail address to avoid automated spam e-mail |